NEC EXP320K, User Manual

Page: 64 / 116

4-4 ESX Server Setup
Step 2: Prepare setup procedure for ESX Server installation
Before installing ESX Server, be sure to do the following. If you do not prepare, setup cannot be
performed properly.
Prepare NEC Express5800/ft series
With the power of NEC Express5800/ft series off, follow the steps below:
1. Prepare NEC Express5800/ft series.
Follow the instructions below to prepare.

Connect each CPU/IO module and external storage with FC cables.

Remove all the optional PCI boards except FC card and peripheral equipments except
external storage.

Remove all the LAN cables.
2. Set the CPU/IO module 0 primary.
The location of the parts required for operations and check are shown below:
CPU/IO module 0
Power LED
CPU/IO module 0
Status LED
CPU/IO module 1
Power LED
CPU/IO module 1
Status LED
CPU/IO module 1
CPU/IO module 1
Power switch
Front side of device
CPU/IO module 0 CPU/IO module 0
POWER switch