NEC EXP320K, User Manual

Page: 88 / 116

4-28 ESX Server Setup
Step 8: Connect and Configure Options
If there is any optional PCI board or peripheral equipment to connect to NEC Express5800/ft series,
turn off the power to NEC Express5800/ft series, and connect it according to the
“
PCI board
”
in
User
’
s Guide and the device
’
s instruction.
Immediately after the installation completes, network configuration for a port is duplicated. When
you change the network configuration or configure the duplication setting by adding a LAN card, it
is necessary to configure the settings from VI client.
For detailed procedures, refer to the
User
’
s Guide packaged with this guide and the Server
Configuration Guide of VMware Infrastructure.
To have enough time to initialize Fibre Channel disk and Fibre Channel switch and so on,
adjust [Server] - [Power On Delay Time] by setting System BIOS configuration Utility.