NEC ElectraElite IPK, General Description Manual

Page: 93 / 151

Electra Elite IPK Document Revision 4
General Description Manual 2 - 39
___________________________________________________________________________________
___________________________________________________________________________________
R-6
RESTRICTION (OUTGOING)
Restriction (Outgoing) prohibits station users from originating outside calls
per station/per trunk. At stations where Outgoing Restriction is assigned, a
user can answer an incoming call, place and receive an internal call, or pick
up a held line on a specified trunk. The number of digits dialed on outgoing
calls may also be restricted per station.
R-7
RING TONE VARIATION
Ring Tone Variation provides three different tones that can be assigned per
telephone or per CO/PBX. With this feature, the user can verify priority CO/
PBX calls or identify particular ringing stations in an area.
R-8
RINGING LINE PREFERENCE
Ringing Line Preference allows a station user to answer any outside ringing
line by going off-hook without having to press the Answer key or the Flexible
Line key associated with the ringing line.
R-9
ROUTE ADVANCE BLOCK
The Route Advance Block assigns up to 32 tables. Each table can contain
four Trunk group priority levels from lowest cost to most expensive. Station
users may have a Route Advance key programmed on their telephone or
may access this feature using a Trunk Access Code. When placing an
outside call, the system follows the Route Advance table assigned for the
station, ensuring that the lowest cost available Trunk group is used. Any
Trunk group can be assigned to multiple route advance priority tables.
S-1
SAVE AND REPEAT
Save and Repeat allows a Multiline Terminal user to save the last outside
number dialed in system memory for later use.
With R4000 or higher, # # must be entered (Instead of #) to repeat the
saved number.
S-2
SCROLLING DIRECTORIES
Scrolling Directories functions like a telephone directory, and provides an
Electra Elite IPK Display Multiline Terminal user a list of system and/or
station speed dial numbers. Using Softkeys, the user can select a speed dial
number and press the Speaker key or lift the handset to dial the number.
S-3
SECONDARY INCOMING EXTENSION
A Secondary Incoming Extension (SIE) can be assigned on a Flexible Line
key. The status is indicated by the LED of the assigned SIE. An incoming
internal, ringing Tie/DID, DIT/ANA, CO Transfer Ring, or call forwarded call
can be picked up from an SIE.