![background image](http://html1.mh-extra.com/html/nec/electraelite-ipk/electraelite-ipk_general-description-manual_3866508084.webp)
2 - 30
Features
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4
Electra Elite IPK
I-2
INCOMING CALL IDENTIFICATION
Incoming Call Identification (provided for Internal Ring Transfer, Call
Forward, and CO Transfer Ring) displays caller name or station number on
Multiline Terminals with an LCD. Internal calls are identified by caller name
and station number. A ringing Tie line/DID call generates a display on the
LCD of the line number. When Caller ID is provided, the CO incoming caller
directory number or name is displayed. System software allows both name
and number to be displayed by Caller ID.
With R4000 or higher, each station can assign a 16-character (including
spaces) name.
I-3
INCOMING TRUNK NAME OR NUMBER DISPLAY
Incoming Trunk Name or Number Display allows names or numbers to be
assigned to each trunk of the system. These names or numbers appear on
the Multiline Terminal LCD when receiving an incoming call.
I-4
INTERNAL HUB
For data communications, a hub is a convergence point where data arrives
from one or more directions and is forwarded out in one or more other
directions. A hub usually includes a switch (a switch could usually be
considered a hub as well). Data comes together at the hub, and the switch
determines how and where data is forwarded. When multiple ETUs requiring
Ethernet data connections are installed in an Electra Elite IPK KSU, the
HUB(8)-U( ) ETU can provide a relatively simple installation.
The HUB(8)-U( ) ETU is an in-skin fast Ethernet switching HUB unit that
provides multiple services.
R1500 or higher is required.
I-5
INTERNAL VOICE/TONE SIGNALING
Internal Voice/Tone Signaling allows a Multiline Terminal user to be signaled
on incoming internal calls by voice announcement or by ringing, depending
on System Programming.
The caller can dial an additional digit to switch a voice announcement call to
a ringing call, or switch a ringing call to voice announcement. This feature
allows Voice/Tone switching from the calling side only.
I-6
INTERNAL ZONE PAGING (MEET-ME)
Internal Zone Paging (Meet Me) allows for up to three internal paging zones.
The zones, consisting of Multiline Terminals, can be paged individually or all
zones can be paged at once. Any station user can answer the page and
speak privately to the originator of the page with the Meet-Me feature.
Summary of Contents for ElectraElite IPK
