NEC ElectraElite IPK, General Description Manual

Page: 9 / 151

General Description Manual i
___________________________________________________________________________________
___________________________________________________________________________________
REGULATORY
GENERAL
INFORMATION
Established Federal Communications Commission (FCC) rules permit this
telephone system to be directly connected to the telephone network. A jack is
provided by the telephone company. Jacks for this type of customer provided
equipment are not provided on party lines or coin lines.
The telephone company may make changes in its technical operations and
procedures. When such changes affect the compatibility or use of the Electra
Elite IPK system, the telephone company is required to give adequate notice
of the changes.
COMPANY
NOTIFICATION
Before connecting this telephone system to the telephone network, the
following information must be provided to the telephone company:
1. Your telephone number.
2. FCC registration number:
H
When the system is to be installed as a Key Function system (no
dial access to Trunk Groups/Route Advance Blocks), use the
following number:
NIFMUL-43074-KF-E
H
When the system is to be installed as a Multifunction system, use
the following number:
NIFMUL-43076-MF-E
H
When the system is to be installed as a PBX Function system, use
the following number:
NIFMUL-43075-PF-E
H
Ringer Equivalence Number (REN): 2.0B
H
USOC jacks required: RJ21X and RJ2GX