![NEC ElectraElite IPK General Description Manual Download Page 98](http://html1.mh-extra.com/html/nec/electraelite-ipk/electraelite-ipk_general-description-manual_3866508098.webp)
2 - 44
Features
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4
Electra Elite IPK
S-23
STORE AND REPEAT
Store and Repeat allows a Multiline Terminal user talking on a CO/PBX line
to store any telephone number in memory for later use.
With R4000 or higher, # # must be entered (instead of #) to repeat the
stored number.
S-24
STORED HOOKFLASH
Stored Hookflash allows any Multiline Terminal user to store a hookflash in a
Speed Dial buffer to allow one-step access to certain Centrex or PBX
features. System Software permits input stored characters to be entered on
the dial pad, but does not allow the Character Code Table to be used.
S-25
SYNCHRONOUS RINGING
Synchronous Ringing synchronizes CO/PBX incoming ringing with the
incoming ringing pattern from a Central Office.
S-26
SYSTEM DATA UP/DOWN LOAD
System Data Up/Down Load, included with NEC Electra Elite IPK System
Administration Terminal (SAT) Software, transfers Station Speed Dial data,
System Speed Dial data, and all System Data from/to an NEC PowerMate
or Pentium
1
-compatible PC. System Data Up/Down Load can be performed
locally or from a remote location.
T-1
T1 CONNECTION
T1 Connection allows the system to be connected directly to FT1 carrier links
using a public or private network. The Digital Trunk Interface, DTI-U( ) ETU,
provides for different types of trunk signaling with FT1 carrier links using
System Programming. The DTI-U( ) ETU supports Loop Start/Ground Start,
Tie line/DID trunks.
T-2
TANDEM SWITCHING OF 4-WIRE E&M TIE LINES
Tandem Switching of 4-wire E&M Tie Lines allows connecting E&M Tie Lines
to other trunks through the system without help or supervision from an
internal station to allow distant-end system users to remotely access trunks.
Pad control is provided on the TLI(2)-U( ) ETU by a programmable
transmission pad to adjust to the line loss levels of the Tie line accessed.
T-3
TENANT SERVICE
Tenant Service subdivides the system into a maximum of 48 Tenants that
have outside line access.
1.
Pentium is a registered trademark of Intel Corporation.
Summary of Contents for ElectraElite IPK
