NEC ElectraElite IPK, General Description Manual

Page: 88 / 151

2 - 34 Features
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
L-6
LOOP START TRUNKS
Loop Start Trunks can be connected to the Electra Elite IPK system. Loop
Start is assigned per trunk at the associated ETU. Ground Start and Loop
Start Trunks can be mixed in the system per trunk. The COI(4)-U( ),
COIB(4)-U20, and COIB(8)-U( ) ETU are Loop Start only.
M-1
MESSAGE DISPLAY BOARD
The Message display Board indicates voice mail messages left for those
without telephones. Message Display Boards include a basic board and
expansion boards. Each basic and expansion board provides up to eight
messages.
M-2
MESSAGE WAITING
Message Waiting is set from the Attendant Add-On Console or from a Voice
Mail Unit to allow the large LED to provide a distinctive message indication to
the station. The station user is alerted to contact the Attendant or Voice Mail
Unit for the message.
M-3
MICROPHONE CONTROL
Microphone Control allows ON/OFF status indication on all Multiline
Terminals. A Flexible Line key or One-Touch key programmed for
Microphone Control or an Access Code is used to mute the microphone for
privacy during incoming voice announcement calls and during calls using the
built-in speakerphone.
M-4
MULTILINE CONFERENCE BRIDGE
Multiline Conference Bridge allows any intercom or outside caller to call the
CNF(8)-U( ) ETU to place a multiparty conference call. Each CNF(8)-U( )
ETU supports one 8-party conference or two 4-party conferences regulated
by a switch setting. Two CNF(8)-U( ) ETUs may be installed. DSP based
amplification provides a higher quality conference call.
M-5
MULTILINGUAL LCD INDICATION
Multilingual LCD Indication provides the option for English, French,
Japanese, or Spanish characters on Multiline Terminals with an LCD.
Language selection is made per station using System Programming.
With R3000 or higher, a multilingual Clock/Calender display is supported.
M-6
MULTIPLE TRUNK GROUPS
A maximum of 32 Trunk groups may be assigned. Each group can have a
separate Trunk Group Access Code. Assigning Trunk groups provides
access to different outside trunks. With Tenant Service, different tenants can
be programmed to access only their Trunk group.