NEC ElectraElite IPK, General Description Manual

Page: 92 / 151

2 - 38 Features
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
P-10
PUSHBUTTON DIAL - DTMF OR DP
Pushbutton Dial – DTMF or DP is provided on all Single Line Telephones
and outside lines. Tie Lines are assigned per trunk to generate either Dual-
Tone Multifrequency (DTMF) or Dial Pulse (DP) dialing signals.
Q-1
QUICK TRANSFER TO VOICE MAIL
A station user transferring a call can force the call to be transferred to the
called party voice mail box after the transferred call recalls, after an internal
station number is dialed while performing a screened transfer, or during
intercom calls.
When 5-, 6-, or 7-digit station numbers are used, this feature is unavailable.
R-1
RECALL KEY
The Recall Key either generates a hookflash to access features provided by
the outside exchange or abandons a call while retaining the CO/PBX line for
another call. Each Multiline Terminal has a Recall key. The function of this
key is programmed.
R-2
RECALL WITH STATION IDENTIFICATION
A transferred, held, or camped-on call that is not answered in a specified
time, recalls. During the recall, the Multiline Terminal display shows the
station number that is recalling and the station that did not answer.
R-3
REDIAL KEY
Users can press the Redial key and dial the Speed Dial buffer number to
access System and Station Speed Dial. Users can also press the Redial key
and
to redial the last outside number dialed.
R-4
REMOTE PROGRAMMING
Remote Programming is used to modify and save all system parameters
from a remote location using a modem. This is a variation of System
Administration Terminal (SAT) PC Programming, and additional software
other than PC Programming is not required.
R-5
RESIDENT SYSTEM PROGRAM
When power is supplied to the system, the hardware configuration is
scanned and Resident System Program default values are assigned. This
enables immediate operation, even before the system is programmed to
accommodate the individual site requirements.