Section 2: Components
Product Description
15
2
Trunk PCBs
4 CO Loop Start Trunk Card (4COIU-LS1) — P/N 0891005
There are two different types of the COIU PCB. One providing ground start trunks - the other is for
loop start trunks only.
The 4COIU-LS1 PCB provides:
●
4 analog loop start line/trunk circuits - no ground start is provided
●
4 trunk status LEDs
●
4 Caller ID Circuits
●
2 Power Failure Transfer Circuits
●
1 PCB status LED
●
1 run/block switch
The CN3 connector provides connection to 4 analog trunk ports, which are polarity sensitive (tip to
tip, ring to ring). The power failure circuits, however, are not polarity sensitive. A maximum of 15
4COIU-LS1 PCBs per system is allowed.
! Important!
●
When connecting the RJ61 cables to the COIU PCB, note the position of the Power Failure
connector. Do not confuse this connector as the trunk connector.
8 CO Loop Start Trunk Card (8COIU-LS1) — P/N 0891004
The 8COIU-LSI provides the same features as the 4COIU-LS1 except for the following changes:
The 8COIU-LS1 PCB provides:
●
8 analog loop start line/trunk circuits - no ground start is provided
●
8 trunk status LEDs
●
8 Caller ID Circuits
●
2 Power Failure Transfer Circuits
●
1 PCB status LED
●
1 run/block switch
The CN3 and CN5 connectors each provide connection to 4 analog trunk ports, which are polarity
sensitive (tip to tip, ring to ring). The power failure circuits, however, are not polarity sensitive. A
maximum of 15 8COIU-LS1 PCBs per system is allowed.
! Important!
●
When connecting the RJ61 cables to the COIU PCB, note the position of the Power Failure
connector. Do not confuse this connector as the trunk connector.
