5-18
ODU MOUNTING
NWD-107460-02E
Installation
5.1.2
With Hybrid/Coupler
This section explains the antenna direct mounting type ODU installation with
Hybrid/Coupler.
Mounting
Note
The details are referred to the installation manual which is attached to
the antenna.
ANDREW VHLP type Bracket
Mounting hole for
Hybrid/Coupler
Hole for guide pin
Note
The tightening torque is 4.0 N·m ±10%.
Be careful not to damage the O-ring (Antenna).
O-ring
Hole for guide pin
O-ring
RFS SB1 type Bracket
RFS C-Mount type Bracket
Mounting hole for
Hybrid/Coupler
O-ring
Hole for guide pin
Mounting hole for
Hybrid/Coupler
Note
The tightening torque is 4.0 N·m ±10%.
Be careful not to damage the O-ring (Antenna).
Submission Prohibited
NEC Internal Use Only