6-30
CABLE TERMINATION
NWD-107460-02E
Installation
4
Connector assembly
(1)
The clamp2 is inserted between the aluminum tape and the braided wire.
(2)
The cable center conductor must be straight and aligned with the connector
inner contact. Insert the cable into the connector body until stopped; the center
conductor must be inserted into the connector inner contact fingers. Tighten
the connection to the torque value of 9 to 11 N·m.
Notes
1
When inserting, do not put the chip which is braided wire inside the
central conductor and the connector body.
2
Do not turn connector body, turn clamp nut attachment.
Clamp2
Connector body
16 mm 9-11 N·m
16 mm
Submission Prohibited
NEC Internal Use Only
