Neat D-SERVER Technical Handbook Download

Page: 107 / 124

NE41 09010-02 v3.0

D-SERVER

Technical Handbook

neat

107

Picture 167.

Putty SSH client window

The advantage of an SSH client compared to traditional D-SERVER debug logs is that

you can perform real time debugging. Accessing to the D-server through SSH also

allows users to access kern.log and syslog. These two files are useful for identifying

memory card related issues.

In order to use SSH an

SSH Key must be requested

from NEAT support.

In addition to an SSH key a login name must be provided to log in. Use

sysadm

7.4

Bitvise configuration

This section will walkthrough how to setup and import a SSH Key. Go to Bitvise

homepage

(https://www.bitvise.com/)

and download the latest installer

and install the software. This walkthrough is valid for Bitvise version 7.31.

Picture 168.

Bitvise Installer

Summary of Contents for D-SERVER





























































































































Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands

Neat D-SERVER, Technical Handbook

Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands