manualshive.com logo in svg

Neat D-SERVER, Technical Handbook

Share
Download
Neat D-SERVER Technical Handbook Download Page 73

NE41 09010-02 v3.0

D-SERVER

 Technical Handbook

neat

73

Modification #1 of Scenario I

It's quite common that the personnel wants to do presence/ready against the alarm 

button. To support this feature the SMILE-STD must be replaced with a SMILE-ID.

This feature only works with D-ATOM and SMILE-ID as they have RFID functionality.

The existing D-SERVER configuration is used but with some minor modifications.

1.  Replace SMILE-STD (101E) with a SMILE-ID. The SMILE-ID in this example has radio 

code 28AD.  

Go to 

Entities

 > 

Devices

 and change the SMILE-STD to a SMILE-ID.

Picture 92. 

Change/add a SMILE-ID

2.  Go to 

System settings

 > 

System parameters

 and enable f

eature-presence-

indication-enabled

 and 

feature-rfid-reception-enabled

 by setting 

its values to 1.

Picture 93. 

Enable presence and RFID functionality in the D-SERVER system

3.  Reload the configuration.
4.  Restart the D-Server application.

Picture 94. 

Restart the D-SERVER application

Summary of Contents for D-SERVER





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands