background image

NE41 09010-02 v3.0

D-SERVER

 Technical Handbook

neat

65

Picture 72. 

Create user(s)

3.  SMILE-STD (101E) is an unknown radio code for the D-SERVER. To associate 101E 

to Matthew Parker, go to 

Entities

 > 

Devices

. When the SMILE-STD is associated to 

Matthew Parker, it's no longer an unknown radio code.

Picture 73. 

Add device(s)

Please note that “Reload configuration” is required to apply configuration.

4.  To create necessary Personnel and Device groups, go to 

Entities

 > 

Device group 

names

. Add 

Personnel Day

Personnel Night

 and 

Misc alarm sources

 group. It is 

important to select 

Log-in allowed (Yes)

 for Personnel Day/Night so the nurses 

can log into their groups. There's no need to configure Log-in allowed for the 

group 

Misc alarm sources

.

Picture 74. 

Define device group name(s)

The nurses (Charlotte Miller and Emma Lopez) must be informed about their Login 

ids. If Charlotte Miller is going to work the Day shift, she should login to Login id 1 

(group 1). If Emma Lopez is going to work the Night shift, she should login to Login id 

2 (group 2).

5.  The D-SERVER does not recognize Charlotte Miller and Emma Lopez so they must 

be added to the system. Go to 

Identifications

 > 

Personnel

 to add Charlotte Miller 

and Emma Lopez.

Summary of Contents for D-SERVER





























































































































Reviews: