manualshive.com logo in svg

Neat D-SERVER, Technical Handbook

Share
Download
Neat D-SERVER Technical Handbook Download Page 66

NE41 09010-02 v3.0

D-SERVER

 Technical Handbook

neat

66

Picture 75. 

Add personnel

The personnel Login id is unique for each user. In our scenario Charlotte and Emma 

must be informed about their unique login id. For a successful login, the personnel 

needs to know their unique login id and what group they should login to. If Charlotte 

Miller should login to "Personnel Night" she must know her unique id (in this sce-

nario it is 1) and which group id "Personnel Night" has (in this scenario it is 2). It is 

possible to create personnel with a generic name. For example Nurse Consultant 1, 

Nurse Consultant 2 etc..

6.  Next step is to add all known devices into our Misc alarm sources group. Our sce-

nario has only has one device (101E). Go to 

Entities

 > 

Device group definitions

.

Picture 76. 

Define device group definition(s)

If the system setup contains a lot of devices, add them into several device groups. 

E.g. devices belonging to Apartment 1-10, Apartment 11-20 and so on.

7.  Since we will use shifts, we need to define the Time schedule. From our checklist, 

we know that the Day shift starts 07:00 AM and the Night shift starts 09:00 PM. 

Go to 

Entities

 > 

Time schedule

.

Summary of Contents for D-SERVER





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands