Neat D-SERVER Technical Handbook Download

Page: 87 / 124

NE41 09010-02 v3.0

D-SERVER

Technical Handbook

neat

All SIP accounts (both software and hardware) needs to connect to a SIP Server. Add

2 SIP accounts for the DECT phones, one for the D-CALL and another one for the local

SIP account.

Picture 124.

SIP server settings

A SIP destination is only a preparation. In this case, it’s a preparation for the alarm

message that will be sent to the nurses. Go to

Destinations

SIP destinations

to cre-

ate a destination.

Picture 125.

Add SIP destinations

Next step is to create a sequence. If there would be more users the sequences could

be called Apartment 2, Apartment 3 etc..
Go to

Routing

Alarm sequence names

to create a sequence.

Picture 126.

Define alarm sequence name(s)

Summary of Contents for D-SERVER





























































































































Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands

Neat D-SERVER, Technical Handbook

Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands