manualshive.com logo in svg

Neat D-SERVER, Technical Handbook

Share
Download
Neat D-SERVER Technical Handbook Download Page 52

NE41 09010-02 v3.0

D-SERVER

 Technical Handbook

neat

52

5.3  DOOR opening

Door opening feature can be enabled from 

System settings>System 

parameters>feature-door-opening-enabled

. Various configuration op-

tions related to door opening are accessible from this menu.

Picture 67. 

Door opening menu

Door lock groups

Define door lock groups and their respective group activation code.

Door locks

Define which WIOR devices that should be added to the specified 

group and what their respective relay action should be when a posi-

tion message matching the specified position code is received.

Personnel permissions

Which personnel should have access to which doors.

User permissions

Which users should have access to which doors.

Forced door opening

Define what relay action to apply to a door lock group when a radio 

message with the specified alarm source and alarm reason is re-

ceived.
Used to open multiple doors at the same time.

Table 38. 

Door opening menu items

Door opening feature is often used together with a D-POS, D-POS ANT, WIOR and  

(Ferrite Antenna).

5.4  System settings

System settings

 contains misc. system settings and displays a list of various 

System parameters. See "5.4.1 System parameters".

Picture 68. 

System settings menu

Summary of Contents for D-SERVER





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands