NDS ExpandOR, Installation Manual

Page: 37 / 52

29
The Capture Still feature captures a single frame from either the transmitting stream or receiving stream and
stores it on the USB disk. The stream selection can be configured under the Record/Capture configuration
section.
A captured image will be saved as a .jpg file in the image folder of the selected USB drive. See View Captured
Image and Recorded Video Lists on page 31 for detailed information about storage functions.
To enable the Capture Still function, press the Front Panel CAPTURE STILL button, or click the Capture Still
button on the Web Interface , or trigger the Capture Still pin on the GPI fixture.
The Front Panel CAPTURE STILL LED will blink once as the frame is captured.
Capture Still Feature