NDS ExpandOR, Installation Manual

Page: 16 / 52

8
System Configuration
1. All active ExpandORs on the subnet will be displayed in the CruzOR window as shown below. If CruzOR
does not list the connected ExpandOR, verify that your network allows broadcast packets. If broadcast
packets are disallowed, use a simple router with DHCP to con
fi gure the ExpandOR before connecting it
to the fi nal network.
2. CruzOR may detect ExpandOR s on other subnets. ExpandORs found on other subnets are highlighted
in red as shown below, and will not be con fi gurable from the current subnet. Only ExpandOR s on the
same subnet as CruzOR can access the Web Interface from CruzOR .
6
The MAC Addresses, and IP Addresses used in this manual are for example only.
Double click the icon shown below to launch the CruzOR utility .
3. Select the ExpandOR to be configured. The selected ExpandOR is highlighted in blue, and the Open Device
button at the bottom of the CruzOR window is enabled.
4. Click the Open Device button to open the Web Interface .
System Configuration continues on the following pages.