NDS ExpandOR, Installation Manual

Page: 18 / 52

10
System Tab
System Tab, Setup Subsection:

Local IP Address:
This is the IP address assigned to the ExpandOR. In the factory default DHCP mode the IP address is
automatically assigned by the
DHCP server.
Note: To ensure the IP addresses are not changed by the network, it is recommended that every ExpandOR
be configured with a static IP address, and following that configuration, we recommend that a label with
the assigned IP address be applied to the unit.

Local Netmask:
Subnet mask used by the networking layer to determine what addresses are within the subnet and which
are in a separate subnet.

Default Gateway:
Default gateway of the network which is used for routing IP packets outside of the current subnet.

Use DHCP:
Uncheck this option to allow the network fields to be edited for a static IP address.
Note: After changing the local network settings, the ExpandOR must be restarted to implement the new
network settings.
Continued on the following page.
Con fi guration:
The Con fi guration section consists of four subsections. Click on a subsection tab to access its associated
content.
1.
System Con fi guration
2. Transmit Parameter Con fi guration
3. Receive Parameter Con fi guration
4. Record / Capture Con fi guration