NDS ExpandOR, Installation Manual

Page: 20 / 52

12
System Tab, Device Management Subsection:
Click Device Management to open the Device Management subsection.
Login : Change the current password using this section. Enter the new password in the New Password field,
again in the Retype Password field, and click the Save button.
When a new password is entered the automatic password fill-in feature is disabled.
Configuration : Restore the system configuration to factory defaults by clicking the Factory Default
button. The system must be rebooted after restoring factory defaults.
Other :

Device Name: Change the device name as required and click the Save button. The updated device name
will be displayed in the right top corner of the web interface.

MIC Gain: Microphone gain may be adjusted by entering a higher or lower percentage from 1 to
100%.

NTP Server IP : An NTP (Network Time Protocol) server may be specified for the ExpandOR to synchronize
its clock. Time synchronization occurs at each boot up.

Upload System Image: An ExpandOR System Image in the expandor.img format can be updated by
clicking the Upload System Image button. This link opens a new page where the user can browse the local
file system to select the image and upload.
Front Panel Access :

Some or all of Front Panel buttons may be enabled or disabled by checking or unchecking the associated
checkboxes. Click the
Save button to save the configuration.
System Tab: Device Management