21
Configuring ExpandOR Multi Node Streaming
Configuring an ExpandOR for Multi Node operation is similar to configuring it for ExpandOR to ExpandOR
operation (see page 17). Configure the first node’s parameters as follows:
1.
IP Address
:
Enter the first receiver IP address in the IP address window under
Transmit To
.
2.
Port
:
Specify the transmit port (e.g.
5004
).
3. Click
the
Add Destination
button as shown to add the second destination.
5.
IP Address
:
Enter the receiver IP address in the IP address window under
Transmit To
.
6.
Port
:
Specify the transmit port (e.g.
5004
).
7. Click the Add Destination button as shown to add the third destination. The Add Destination button is now disabled.
8.
IP Address
:
Enter the receiver IP address in the IP address window under
Transmit To
.
9.
Port
:
Specify the transmit port (e.g.
5004
).
10.
To delete a destination, click the
X
button.
Summary of Contents for ExpandOR
