NDS ExpandOR, Installation Manual

Page: 19 / 52

11
System Configuration: Web Interface Configuration - System Tab
System Tab, Local Display Panel:

S-Video Format:
When the ExpandOR is transmitting a video stream to a remote destination
(another ExpandOR or a computer), local S-Video output always displays what
is being transmitted. The user can specify the S-Video format as either NTSC
or PAL.

DVI Out Format:
When ExpandOR is receiving a video stream, its local DVI–OUT port outputs
what is being received. When the ExpandOR is in transmitting only mode, local
DVI-OUT outputs what is being transmitted. Select the local DVI-out format
from the dropdown menu to suit your display’s capabilities.

DVI Out Display Reset:
The DVI-out Display Reset option can be used to prevent issues encountered with displays that are unable
to detect seamless mode switching.
The default DVI Output Display Reset setting (unchecked) provides the fastest DVI output switching with
the least amount of flickering. With this setting, the DVI output timings change seamlessly to
accommodate different video streams but may cause incorrect signal detection with some monitors.
When the DVI Output Display Reset setting is checked, the ExpandOR will stop the DVI output and start it
again every time the user stops or starts the stream on the local ExpandOR.
Click the Save button to apply the settings.
Note: Changes to the video output will not take affect while a video stream is being transmitted or
received. For any changes to take effect the video stream must be stopped and restarted.
System Tab, Device Management Subsection:
Device Management parameters are detailed on the following page.