4-40
BenchMike Pro Instruction Handbook: Setup
The
SQC Setup
menus for each of the SQC parameters are
identical except for the title. Use these pages to change the
label of the parameter or change its location on the main
measurement page. You can also decide to transmit these
values through the serial output. These parameters are: Av-
erage, Count, Diff/TIR, Maximum, Minimum, and Standard
Deviation.
The
Optical Plate Temperature
displays the optical plate
temperature as detected by the hardware.
The
Motherboard Temperature
displays the motherboard
temperature as detected by the hardware.
The
Actual Temperature
displays the part temperature as
entered by the user. When Thermal Compensation is ena-
bled, this value affects the measurement.
