BenchMike Pro Instruction Handbook: Setup
4-47
4.15.4 Screen Configuration
formation about these functions.
4.15.5 Scanner Configuration
From these three pages, you can send and receive infor-
mation about the configuration of the BenchMike Pro’s scan-
ner settings. This information is typically only used by NDC
Technologies Service personnel. The data can be sent or
received via the serial ports. The data is in ASCII format and
can be saved on a PC. The
Local file
option will save the
scanner setting data to a file on the unit that is independent
of the library file. Saving the file to
USB file
will write the data
to a user-provided USB Flash memory device inserted into
the rear USB-A port. The file will be written to the root folder
under the
NDC_BenchMike
folder. The name will be com-
posed of the serial number of the unit, followed by
.lintable
.
For example, with a serial number of 34-19-3042, the file-
name would be \NDC_BenchMike\34-19-3042.lintable.
DO NOT
use the Receive New function to transfer Scanner
Configuration settings from one BenchMike Pro to another
without contacting Customer Service first. Improper use of
this function may cause your BenchMike Pro to operate im-
properly.
From the Scanner 2 page, you can enable or disable three
settings of the scanner: F Double Differentiation,
Use Linear Table, and Use Barometric Compensation. Note
that you should not change the double differentiation func-
tion. The gauge will not function properly if altered.
The calibration reminder information on Scanner 3 page can
be used to set the reminder to match your standard calibra-
tion schedule. The expiration date is displayed on the About-
Scanner page.
