4-46
BenchMike Pro Instruction Handbook: Setup
4.15.1 Entering the System Pass-
word
When you choose
Yes
, you will be asked to enter the pass-
word. The default password is
000000
.
NOTE: To toggle between upper case and lower case let-
ters, press the Up arrow button.
4.15.2 Security Page
The Configuration screen will appear. To enter a new
password or change an existing password, touch the current
password in the Password block. The alphanumeric touch
pad appears, and you will be prompted to enter new pass-
word. Touch the Password block and enter your password
on the alphabetic touchpad.
Verify your password by re-entering when prompted.
Press OK to verify your new password.
The new password will appear in the password block.
Select options by touching the square next to the feature desired. A checkmark means that option is enabled.
Note that when Power up locked is checked, the unit will be automatically locked on power up.
4.15.3 Lock Page
From this page, you can enable or disable three settings
for locked operation.
When checked,
Allow nominal/limit/setup changes
will
allow you to change nominal and limits settings when the
unit is locked.
When checked,
Allow remastering
will allow you to
change the master when the unit is locked.
When checked,
Allow library changes
will allow you to
change libraries when the unit is locked.
All features chosen are activated when the OK button is pressed.
