BenchMike Pro Instruction Handbook: Setup
4-43
The
Diagnose
page graphically shows the position of the
product in the scanning laser beam. This page is used to veri-
fy that the product is positioned properly within the beam.
When you press the
Lock
button on the Status menu, you will
be asked to confirm that you wish to lock the BenchMike Pro.
Locking the BenchMike Pro secures all setup parameters so
that they cannot be inadvertently changed.
Once the BenchMike Pro has been locked, you must enter the
password to unlock the BenchMike Pro. Press the Unlock but-
ton from the Status menu, and enter the password. The facto-
ry-defined password is
000000
.
The
About
page allows you to view the current software revi-
sion for your BenchMike Pro. This information is helpful when
speaking to Customer Service personnel about a problem.
The
Configure
button allows you to control system parame-
ters such as security, user interface settings, and scanner configuration.
Revision
information about a NDC
Technologies Intelligent Fixture is also available from the Fixture tab, if an Intelligent Fixture is in use.
