NCR S46, Manual

Page: 39 / 90

Console Redirection
NCR S46 Server MP-RAS Support Guide 2-7
Group Options Comments
Console
Redirection Select COM Port for
Redirection Enable the COM port you want to
use for console redirection. Your
choices are: Disable, Redirection
on COM1 @ E4000, or
Redirection on COM2 @ E4000.
Serial Port Baud Rate Enter the baud rate for the
remote support modem. Your
choices are: 9600 Baud, 19.2 K
Baud, 38.4 K Baud, or 115.2 K
Baud.
115.2 K baud rate is not
recommended. The Diagnostic
Partition does not support file
downloads (via the rf utility) at
115.2 K baud.
UNIX MP-RAS does not support
the 115.2 K baud rate for remote
console, either via modem or
direct connect terminal.
Hardware Flow Control Enter the type of flow control to
be used. Always set this option to
“CTS/RTS & Carrier Detect” flow
control.
Select Terminal Type “ANSI” is the only available
option.
After you save the configuration and exit from the SCU, you must reboot the
system for changes to take effect.
Note: When you change the console redirection baud rate, you must
synchronize your modem’s baud rate to the new speed. To do this, select
“Enable Auto Answer” or “Disable Auto Answer” from the “Modem Utilities”
menu of the Diagnostic Partition or Platform CD-ROM.