NCR S46, Manual

Page: 81 / 90

Modem Configuration in UNIX MP-RAS
NCR S46 Server MP-RAS Support Guide 2-49
Note: If you enter a password that contains less than 6 or more than 12
characters, the password currently stored at the specified password number is
deleted. Also, the modem returns an error indicating that an invalid password
was entered. Use this mechanism to manually delete a password.
The following table lists other password-related AT commands:
Command Description
at*c1 enable password checking at the modem
at*c0 disable password checking at the modem
at*l list all currently defined passwords
Sample cu Session
Following is a sample cu command session that shows how to set the modem’s
password 0 to NCRONLYS46 in call-through mode. The example assumes
that you have a Lasat modem connected to the COM1 serial port. Commands
typed by the user are in bold, system responses are in normal font, and
comments on the sequence are in italics.
1. Starting at the shell prompt, enter:
# cu -lterm/00
The system displays:
Connected
2. Enter:
ATE1Q0
This command enables echo and OK responses. The modem may not echo
this command back to you. The system displays:
OK
3. Enter:
AT*P0:NCRONLYS46
This command sets the call-through password. The system displays:
OK