NCR S46, Manual

Page: 55 / 90

Preparing the Remote Location
NCR S46 Server MP-RAS Support Guide 2-23
Preparing the Remote Location
This section describes how to prepare a system to act as a remote terminal
when remote management of your server is required.
This section provides instructions to configure PROCOMM PLUS, Version
3.0. PROCOMM PLUS is the only communications program tested to date
that fully supports the ANSI BBS standard and ANSI color. In addition, you
can configure extended keyboard mapping information with PROCOMM
PLUS.
General Requirements
To support a system from a remote location with PROCOMM PLUS, Version
3.0, you need the following:
•
Analog phone line (digital phone lines do not work with the modem)
•
High speed modem (a 28.8 Kbps modem is recommended if you are
running console redirection at 38.4 K baud speeds. However, you can also
use a 14.4 K bps modem if you reduce the redirection speeds
accordingly.)
•
Windows operating environment (Windows 3.1, Windows NT, or
Windows 95)
PROCOMM PLUS Settings
Information in this section is based on the following assumptions:
•
You performed an Express Install of PROCOMM PLUS, Version 3.0.
•
PROCOMM is defined to operate on COM1 or COM2 with your remote
support modem
•
You selected a default window setup