NCR S46, Manual

Page: 77 / 90

Transferring Files To and From a Remote Location
NCR S46 Server MP-RAS Support Guide 2-45
Parameter Values Description
Port= 1, 2 Server COM port to use for file
transfer
Note: The COM port must be the
same as the console redirection port.
Console redirection defaults to COM1.
Baud= 300, 1200, 2400,
4800, 9600, 19200,
38400, 57600,
115200 Baud rate
Note: The file transfer baud rate
must be the same as the console
redirection baud rate. Console
redirection defaults to 38400 baud.
Only 9600, 19.2K, and 38.4K are
recommended.
DownloadDir= <directory name> Directory into which files are
downloaded on the server by the rf
utility
Note: NCR does not specify a default
directory. Files are downloaded into
your current directory.
Handshaking= XON/XOFF
RTS/CTS
None
Type of flow control to use
Note: The flow control setting must
be the same as the console
redirection flow control setting.
Console redirection defaults to
RTS/CTS + Carrier Detect monitoring.
Choose RTS/CTS for file transfers.
Protocol= ZMODEM
YMODEM
File transfer protocol
Note: The default set by NCR is
ZMODEM.
Reboot= YES
NO
Specifies whether to reboot server
after file transfer is complete
Note: Default should be YES.
Filelist= <filename> File containing a list of files to send
when using the sf utility
Note: NCR does specify a default.
Files to be sent are specified on the sf
command line.