NCR S46, Manual

Page: 48 / 90

Configuring a Remote Support Modem
2-16 MP-RAS Remote Support
This section discusses the steps necessary to configure a modem for remote
management from the Diagnostic Partition or Platform CD-ROM menus.
These menus also provide other modem utilities. Refer to the NCR S46 Server
User Guide, Chapter 3, “Hardware-Related Utilities and Applications,” for a
general discussion of the Diagnostic Partition and Platform CD-ROM modem
utilities.
Accessing the Modem Utilities Menu
This section explains how to access the Modem Utilities menu from the
Diagnostic Partition and the Platform CD-ROM.
Accessing From the Diagnostic Partition
To access the Modem Utilities menu from the Diagnostic Partition, follow
these steps:
1. Boot to the Diagnostic Partition.
2. Select “Run Utilities and Diagnostics” from the MS-DOS Startup menu.
3. Select “Remote Support” from the main menu.
4. Select “Modem Utilities” from the Remote Support menu.
The system displays the Modem Utilities menu.
Accessing From the Platform CD-ROM
To access the Modem Utilities menu from the Platform CD-ROM, follow
these steps:
1. Boot from the Platform CD-ROM.
2. Select “Run CD Utilities and Diagnostics” from the MS-DOS Startup
menu.
3. Select “Remote Support” from the CD main menu.
Note: If the Diagnostic Partition is not installed, you must first select
“Execute Utils from CD.”
4. Select “Modem Utilities” from the Remote Support menu.