Navman iCN 500 series, User Manual

Page: 57 / 100

57
iCN 500 series | User Manual
14. Route Demonstrator
The Route Demonstrator allows you to:
• Preview a route.
• Plan and view a route without a GPS fix, such as when you are inside a building.
Step One: Activate Route Demonstrator
1. From the Main Menu screen, tap Preferences .
2. From the Preferences screen, tap Routing .
The Routing screen will display.
3. Press twice.
4. Select the Demonstrate Route check box.
5. Tap Save .
The Main Menu screen will display.
Step Two: Select Departure Point
If you have a GPS fix, you do not need to select a departure point unless you want the
demonstrated route to start elsewhere.
1. From the Main Menu screen, tap Map .
The
2D Map
screen will display.
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
3. Position the intersection of the cross-hairs on your departure point. Where the cross-
hairs intersects on a street, the street will highlight and the street name will display.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
3. Select
Set as Start Location
.
The Pop-up menu will close.
Step Three: Select Destination Point
Set a destination either by using the Destination screen (see pages 21-37) or by using the
2D Map screen Pop-up menu by completing the following:
2. Tap the
Map
screen or press the
4-way toggle
button to display the cross-hairs.
2. Position the intersection of the cross-hairs on your destination point. Where the cross-
hairs intersects on a street, the street will highlight and the street name will display.
3. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
4. Select Navigate To .
The
Pop-up
menu will close. The
3D Map
screen will display the calculated route in
Route Demonstrator mode.
• If you have selected the Repeat check box on the Routing preferences screen, the
Route Demonstrator will continue to repeat the route.