Navman iCN 500 series, User Manual

Page: 28 / 100

28
iCN 500 series | User Manual
G
et
tin
g
st
ar
te
d
Setting Your Destination by Address -
Case Study Two: Australia, Canada and USA
This case study will show you how to set your destination by selecting your country, then state,
then town or city, then street, then house number.
Note: This case study applies to Australia, Canada and USA only. For navigating in Europe and
New Zealand, see page 24.
Step One: Open the Destination screen
a. From the
Main Menu
, tap
Go To
.
b. From the Go To screen, tap Address or POI .
The Destination screen will display.
Important Note:
i. If this is the first time you are setting your destination and you have maps from more than
one country installed and selected, then the Select country screen will display instead of
the
Destination
screen. Go directly to Step Two: Select the Country of Destination,
step b .
The next time you perform this procedure, the
Destination
screen will open as expected.
ii. If this is the first time you are setting your destination and you have maps from only one
country, but more than one state installed and selected, then the Select State screen will
display instead of the Destination screen. Go directly to Step Three: Select the State
of Destination .
The next time you perform this procedure, the Destination screen will open as expected.
Step Two:
Select the Country of Destination
If you only have the map of one country installed and selected, that country is selected for
your destination by default and cannot be changed. Go to
Step Three: Select the State of
Destination .
a. From the Destination screen, tap Change country or Change country or state .
The
Select country
screen will display.
b. Select a country from the list.
The Select state screen will display.
• If you only have the map of one state installed and selected, that state is selected for
your destination by default. Go to Step Four: Find the Town or City of Destination .