changed the lane) or has slightly changed (turning angle did not exceed 30 degrees), the coordinates are not
recorded in the memory of the device. When the filtering is anebled, a "minimum angle" may take a smaller
value for a more detailed drawing of the turn.
Examples of records for satellite channels (IRIDIUM/GLOBALSTAR/ INMARSAT/ГОНЕЦ)
[Type of transmitter] –
Choose one of the transmitters available in the list to make settings.
[Encryption of data] -
Selecting the server of an interface of satellite channel and mapping software.
-
«SAT2IP.11.CRYPTO»
provides compression of the transmitted information and its encryption before
being sent through the satellite network, the minimum data packet in this case is 11 bytes. In this mode, the
device operates in coordination with the SAT2IP.RU data transmission server. When a satellite transmitter is
connected (activated) the server address SAT2IP - 81.23.194.44:10889 shall be set from the service provider.
-
"User"
service does not encrypt and does not compress the data, all data are transmitted to the map
server directly from a satellite operator in accordance with the standard GPRS protocol (device IMEI and ID are
not transmitted).
[Name of the object] –
A random name of the object. It is used to reach the desired object quickly by
name in the list of objects in the personal account of www.sat2ip.ru server. You can enter the customer's name
or any other information in this field.
[IMEI SBD] -
IMEI of a satellite transmitter. It is displayed automatically when configuring the local
device. When the device is remote, it must be entered manually. In the case of remote configuration via a
satellite communication, it is recommended to download the configuration from the cloud. Work with the cloud
configuration service is described in the section "Work with the cloud service." If the IMEI is not displayed, click
the REFRESH button to force the transmitter polling. If after the forced polling the IMEI is still not displayed, it
means either the transmitter is not available, or it is faulty
.
[IMEI GSM] –
IMEI GSM of a transmitter. It is displayed automatically when configuring the local
device. When the device is remote, it must be entered manually. In the case of remote configuration via a
satellite communication, it is recommended to download the configuration from the cloud. Work with the cloud
configuration service is described in the section "Work with the cloud service." If the IMEI is not displayed, click
the REFRESH button to force the transmitter polling.
[Download from SAT2IP] -
Download of the current configuration from the cloud SAT2IP. If the
configuration has been unloaded before, it can be downloaded without connection of the configurator to the
device for further modification and to be saved on the server and sent to the device. If the structure of the
protocol was changed, it is strongly required to upload the configuration to the cloud and the device.
[Upload to SAT2IP] –
Upload of the current configuration to the cloud, registration, and saving of
instrument settings on SAT2IP server. The button shall be pressed after the configuration has been recorded to
the device. Before putting the device into operation and testing the satellite link, it is required update SAT2IP.
Data destination address (map server) is taken from the GPRS connection settings.
[TEST] -
After updating the device settings and when this button is pressed, an extraordinary data
packet is formed to be sent via the satellite channel. This function is used to test the transmission of data from
the device to the end map server addresses. These are considered to be posted, if answered, "The data packet
delivered."
[Transmit data only on the events]
– when there is no communication via either GPRS, the device will
not automatically switch to the satellite communication channel. The record and transmission of point and the
data will be sent to the server exclusively for the event. For example, if the Input 1 responds, the following
action is set- "Send the current data to the server." For details, see the setting of the event in the section "8.3.3.
Inputs, Outputs, and Events."
