The values of fuel level sensors "Level 1" and "Level 2" are taken from the sensors connected to the
PORT 1 and PORT 2 on the RS232 interface, respectively. If sensors with the RS485 interface are connected to
the PORT 1, the "Level 1" is responsible for the operation of the sensor with the network address no.1, "Level 2"
with the address no.2 and so on till the eighth sensor. If the fuel sensor has an integrated temperature gauge,
the sensor’s internal temperature is displayed in front of the sensor readings.
Diagnostics window displays the current actions of the device. It is designed to debugging stored
configuration operation and detection of the device malfunctions. All actions are displayed in a readable textual
format. Therefore, even an inexperienced user can easily understand the information displayed.
7.2.2.
«COMMUNICATION» PANEL
The panel is designed to adjust the parameters of communication channels, the choice of priorities
and testing based on the configured parameters.
For various modifications, the data transmitters assigned to the channel are visually displayed on the
panel of communication channels. If in the section of "Digital ports" the satellite transmitter of the Inmarsat or
GONETS type is selected as a connected device, they will also be displayed on the panel of communication
channels.
The basic parameters specify the server addresses with cartographic software and data
communication protocol for each of them. The structure of the protocol is configured, one for both servers.
Automatic update of the device’s software allows you to upload the latest update to the device by the specified
date range. The IP address of the upgrade server is not required to change.
Various structures can be selected for GSM/WiFi transmitters and satellite communication channel in
the section of "Protocol Structure Setting".
In particular, to save the satellite traffic, it is not recommended to transmit the HDOP level, the
number of satellites, speed, course, tachometer data and engine hour indicator via the satellite.
For user convenience, the structure can be copied from the GSM/WiFi panel to the Setillte panel.
