(4)
– The Slot for Micro SD card. For black-box functions, an announcement device, the TM key store, and
other logic integrated with the device.
(5)
- The connector to connect Naviset HF-1 handsfree and dispatcher voice call button
(6)
- The connector of power input, and for connection analog and digital peripherals, an announcement
device, CAN interface, temperature sensors and TM key contactors.
(7)
– The slot for the SIM card 1. Slot for SIM2 is inside the device.
(8)
- The button of the hard reset of the device. When an external power supply is absent, it is used to
disconnect the battery, and as a result to completely disconnect the device.
(9)
– The device state indicators. Depending on the modifications they may have different information
display modes. See more detailed information in the truth table of indicating.
(10)
- USB (B type) connector for connection to a PC and device settings using the Configurator program.
All external circuits described in the instructions are connected via the interface connector (6). For user’s
convenience, the illustrated interface connector has color differences for each contact in accordance with its
functional purpose.
Contact of the Primary
Interface
Functions Performed
+12V
Power input for connection to the car electrical system
GND
Common power wire, minus
IN1
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN2
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN3
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN4
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN5
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN6
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN7
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
IN8
0-36V analog/digital input, frequency (square signal) from 0 to 10 kHz
OUT1 / IN 9
Output - impedance, closed onto GND, the inversion/ discrete, frequency
OUT2 / IN10
Output - impedance, closed onto GND, the inversion/ discrete, frequency
OUT3 / IN11
Output - impedance, closed onto GND, the inversion/ discrete, frequency
OUT4 / IN12
Output - impedance, closed onto GND, the inversion/ discrete, frequency
CAN-H
RS232 interface or CAN line. Selection of the SW-1 switch
CAN-L
RS232 interface or CAN line. Selection of the SW-1 switch
RS485 A1
RS485 interface A line. Hardware-compatible with RS232 TX1
RS485 B1
RS485 interface B line. Hardware-compatible with RS232 RX1
RS232 TX1
RS232 TX interface 1 port, hardware-compatible with the RS485 line A
RS232 RX1
RS232 RX interface port 1 hardware-compatible with the RS485 line B
RS232 TX2
RS232 TX interface 2 port
RS232 RX2
RS232 RX interface 2 port
SKP OUT
Output to the loudspeaker of the announcement device or the voice alerter.
1-WIRE
Input for connection of the TM and temperature sensors
Contact of the Primary
Interface
Functions Performed
SPK
Input for connection of the external headset amplifier input
Naviset HF-1
handsfree
MIC
Input for connection external headset microphone
Naviset HF-1 handsfree
+12V
GND
In1
In2
In3
In4
In5
In6
In7
In8
1-W
SPK
OUT
Tx1
Rx1
A1
B1
Tx2
Rx2
CAN
(H)
CAN
(L)
SPK
GND
MIC
IND
(BUT)
OUT1
(IN9)
OUT2
(IN10)
OUT3
(IN11)
OUT4
(IN12)
