[Data Sending Parameters] -
Data recorded for transmission via the satellite channel can be
transmitted at the time they appear/of points recording or accumulate in the buffer and send a few points at a
time. The first variant is used if the GSM/GPRS network and the device occur very rarely, it means that mainly
the satellite channel works. It is reasonable to use the second variant if the device occurs withing the coverage
area of GSM/GPRS, because when the data transmission landline networks are absent, the device will record the
points of coordinates to the buffer to send data via the satellite channel, when GSM/GPRS network appears,
they will be removed from the transmission, which will result in savings of satellite traffic
.
[Paramtetrs of settings to the clipboard to send data] -
the points with coordinates can be recorded
at appropriate intervals, when an object is moving or at a certain covered distance, which is determined by the
built-in odometer. For cars, machinery and other slow-moving vehicles it is recommended to make a record at
an interval, for the aviation and marine equipment it is recommended to make a record according to the
distance covered.
[Historical records when parking] -
If the object requires a long parking and at the same time it is
necessary to periodically receive telemetry from it, for example from the fuel sensor for drain, you can use this
option. It is recommended to set an equal value
[Traffic restriction, month, bytes] –
Setting up the limit of the terminating and outgoing traffic (total
value). If the specified threshold is exceeded, the transmitter is turned off by 23:59 pm of the last day of the
calendar month. This function is used to prevent a possible overrun of satellite traffic and excessive use of the
alarm button.
[Control via the satellite] –
It is possible to change the configuration and control the device both
locally and remotely. The section allows you to make changes in time intervals of data transmission via the
satellite and the logic of these packages recording, in this case only a part of the configuration is changed, and
the traffic is saved. You can record the new configuration completely (do not abuse this function, since the size
of the configuration is 1500 bytes) or restart the device.
7.2.3.
«MONITORING» PANEL
In this section, the parameters to filter data received from a satellite receiver are set in the discretion
of the user.
