User’s manual NAVIGON 25xx Explorer
- 14 -
Switching on the NAVIGON 25xx
Note:
How to deactivate demo mode is explained in "Troubleshooting"
in section "I have accidentally activated demo mode" on page 87.
Note:
If you have not used the
NAVIGON 25xx
for a long time, the
battery may be flat.
When you connect the navigation device to the supplied car charger
cable, it can be switched on immediately even if the battery is flat. If you
use a different charger cable or have connected your device to a PC, it
may need charging for approx. 3 minutes before it can be switched on.
Chargers and other accessories are available in the NAVIGON online
shop at
www.navigon.com
or in specialist stores.
Switching the navigation device to standby mode
►
Press briefly on the
(
On/Off
) key (max. 2 seconds).
Automatic Standby
You can configure the
NAVIGON 25xx
so that the navigation device is
automatically switched to standby mode when not in use.
►
In the
N
AVIGATION
window tap on Options > Settings > General >
Automatic Standby.
►
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins., After 20 mins.,
After 30 mins.).
►
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
►
Press the
(
On/Off
) key and keep it pressed until the message
"Let go of the key to switch off the device." appears. (Approx.
6 seconds.)
Note:
When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly and with the window which
was active when switched off. In standby mode the device still
consumes a small amount of energy however. Depending on how full
the battery is, it can become flat within a few days or a few weeks.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
