National Instruments NI DIDS-2103, User Manual

Page: 102 / 223

102 | ni.com | NI DIDS-2100 Series User Manual
Detail: When DIX Timing Mode is set to SOI , this parameter specifies the Start of Injection (SOI) timing in
Degrees before TDC. When DIX Timing Mode is set to
EOI
, this parameter is disabled and retains its most
recent value.
Figure 4.5.2.1.a, Pulse Train for SOI Timing Mode. The reference timing is TDC position for each individual cylinder. Applicable to
EPT mode.
EOI Timing
Tip Strip: End Of Injection angle with respect to TDC
Units: DBTDC
Detail: When DIX Timing Mode is set to EOI , this parameter specifies the End of Injection (EOI) timing in
Degrees before TDC. When DIX Timing Mode is set to
SOI
, this parameter is disabled and retains its most
recent value.
Figure 4.5.2.1.b, Pulse Train for EOI Timing Mode. The reference timing is TDC position for each individual cylinder. Applicable to
EPT mode.