106 | ni.com | NI DIDS-2100 Series User Manual
Timing Ch1
Tip Strip: Start Of Injection angle with respect to TDC
Units: DBTDC
Detail: Specifies the Start of Injection (SOI) timing in Degrees before TDC.
Delay Ch1
Tip Strip: Delay between timing and actual Start of Injection (SOI) angle.
Detail: Specifes the time-based delay between the
and the Start of Injection angle. The feature
primarily exists for use when using the PFI channel as a digital output channel. For alternative PFI channel
output configurations, click the PFI Output Config button.
Duration Ch1 (msec)
Tip Strip: Duration of injection pulse
Units: msec
Detail: Time duration of the EPT mode injection pulse. The
ON/OFF
parameter determines whether the pulse will be active or inactive.
Duration Ch1 (CAD)
Tip Strip: Duration of injection pulse
Units: CAD
Detail: This parameter is always disabled but automatically updated with a calculated crank angle degrees
duration value. It is calculated based on
Tab of the
Setup window.
Timing Ch2-4 (DBTDC), Delay Ch2-4 (msec), Duration Ch2-4 (msec) and (CAD)
Tip Strip: Timing, Delay and Duration of injection pulse
Units: DBTDC, msec and CAD
Detail: See information for
Summary of Contents for NI DIDS-2103
