National Instruments NI DIDS-2103, User Manual

Page: 108 / 223

108 | ni.com | NI DIDS-2100 Series User Manual
Duration Ch1
Tip Strip: Duration of injection pulse
Units: msec
Detail: Time duration of the TMP Mode injection pulse. The
ON/OFF
button above each Delay and Duration
parameter determines whether the pulse will be active or inactive.
Duration Ch2-4
Tip Strip: Delay and duration of injection pulse
Units: msec
Detail: See information for Delay Ch1 and Duration Ch1 .
TMP-OneShot_PFI_ChnX
Tip Strip: Manually triggers TMP injection command sequence
Detail: Pressing this button will trigger the configured TMP command sequence to the associated PFI Driver
module channel. The sequence will be triggered once with each button press.
PFI Output Config
Tip Strip: Opens PFI Output Mode configuration window
Detail: This button opens a window that allows users to change the mode of output operation for each of the
PFI channels. Each channel is normally configured to drive a PFI injector, but each can be configured as
either an active high or active low digital output.