![background image](http://html1.mh-extra.com/html/national-instruments/ni-dids-2103/ni-dids-2103_user-manual_3423830172.webp)
172 | ni.com | NI DIDS-2100 Series User Manual
4.12 Auxiliary PWM Setup Window
The purpose of the Auxiliary PWM Setup window is to configure up to four independent internally generated Pulse
Width Modulation (PWM) signals to be assigned to digital input destinations via the
window. The
timing specification can be Frequency or Period, and the control specification can be Duty Cycle or Pulse Width.
AuxPWMX-TimingMode
Tip Strip: Format of PWM signal command
Detail: Selects the specification mode for the time between rising edges of the PWM signal. The options are
Frequency
or
Period
. The fields for
Frequency
or
Period
will be enabled according to the selection.
AuxPWMX-ControlMode
Tip Strip: Format of PWM signal command
Detail: Selects the specification mode for the time between rising and falling edges of the PWM signal. The
options are
Duty Cycle
or
Pulse Width
. The fields for
Duty Cycle
or
Pulse Width
will be enabled according
to the selection.
Summary of Contents for NI DIDS-2103
