National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
is blank, then the associated operating point is always satisfied. This type of
Wildcard can be useful to specify a default operating point if it is used for operating point 0. If no other
Wildcard is satisfied, then the default operating point will be executed, without setting the
. If another higher operating point Wildcard is satisfied, then the higher operating point will be executed
if the
control is set to “Highest Takes Priority”. Otherwise, the
point will be executed.
Flex Control Parameters
Detail: Array of drop-down selection controls for selecting the
to be manipulated by
each operating point. There are many
to choose from, related to many different
controls from various setup windows within the DI Driver System. The value for each selected
will be overwritten by the value entered for each active operating point in the table.
Operating Point Table Values
Detail: The table values are shown as a two dimensional array of values, specifying the value to overwrite
during each active operating point. Most
are single-point precision controls which require a single-point precision numeric value. Some
are Boolean controls which require a value of
0
or
1
to represent
FALSE
or
TRUE
, respectively.
are mode controls from various system setup windows which have drop-
down text descriptions. The text descriptions should not be entered in these table fields. Instead, the integer
representation should be entered, starting with 0 for the first drop-down selection.