National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
4. The selected target IP Address should be listed in the
IP Address field
and additional target information will be
shown in the
Target Description
field.
5. In the lower half of the
Backup Target
dialog, press the
Backup Target
button to browse the PC to specify the
location to save the DI Driver System software image zip file. Select
OK
to close the location selection dialog.
7. During the image backup process, the PC cursor will indicate busy while hovering over the
Backup Target
dialog.
The process will take about 3 minutes.
8. When the backup process is completed, press the
Back
button to close the
Backup Target
dialog to return to the
Real-Time System Backup
dialog.
9. Press the
Exit
button to close the
Real-Time System Backup
dialog.