![background image](http://html1.mh-extra.com/html/national-instruments/ni-dids-2003/ni-dids-2003_manual_3421784103.webp)
National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
Detail: When
is set to
SOI
, this parameter specifies the Start of Injection (SOI) timing in
is set to
EOI
, this parameter is disabled and retains its most
recent value.
Figure 4.5.2.1.a, Pulse Train for SOI Timing Mode. The reference timing is TDC position for each individual cylinder. Applicable to
EPT mode.
EOI Timing
Tip Strip: End Of Injection angle with respect to TDC
Units: DBTDC
Detail: When
is set to
EOI
, this parameter specifies the End of Injection (EOI) timing in
is set to
SOI
, this parameter is disabled and retains its most
recent value.
Figure 4.5.2.1.b, Pulse Train for EOI Timing Mode. The reference timing is TDC position for each individual cylinder. Applicable to
EPT mode.