National Instruments NI DIDS-2003, Manual, Page: 27 / 214

National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
This will cause SCM to search the network for a National Instruments RT controller, such as the cRIO-9076
or
cRIO-9022
. If the DI Driver System controller is discovered, take note of the discovered IP address. The
Windows PC used to interface with the system must have a similar IP address and Subnet mask as the
system controller, but the IP address must be different in the last address number. The Subnet mask should
be 255.255.255.0. Refer to the Out Of The Box Connection section to see how to change the IP address of
the Windows PC. The Select RT System dialog may be exited by selecting the Cancel button. The Backup
Target
dialog may be exited by selecting the
Back
button. The
Real-Time System Backup
dialog may be
exited by selecting the Exit button.
4. Check the System Controller Ethernet Cable Connection