National Instruments NI DIDS-2003, Manual, Page: 176 / 214

National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
Undefined Trigger Behavior
Tip Strip: Determines behavior when no trigger is present
Detail: Selects the behavior of the operating points function while an operating point is not defined during
Trigger Mode . This parameter is not applicable to Timer Mode .
Hold Current OP: Do not do anything, but remain in the current operating point until one of the Trigger
Wildcards is satisfied.
Goto Error State:
Change operating point to the point specified by Error OP .
Multiple Trigger Behavior
Tip Strip: Determines behavior when multiple triggers are present
Detail: Selects the behavior of the operating points function while there are multiple operating points satisfied
by the Trigger Wildcards . This parameter is not applicable to Timer Mode .
Highest Takes Priority: Change operating point to the point which has the highest operating point number
(index).
Goto Error State: Change operating point to the point specified by Error OP .
Multiple Trigger Error
Tip Strip: Indicates multiple triggers are present
Detail: When in Trigger Mode , and Multiple Trigger Behavior is set to Goto Error State , indicates when
multiple simultaneous triggers have been encountered and the error state will be executed.
Undefined Trigger Error
Tip Strip: Indicates no trigger is defined for selected process variables
Detail: When in Trigger Mode , indicates when no trigger condition is satisfied by the specified Trigger
Wildcards , and the error state will be executed.
Time/Wildcard Error
Tip Strip: Invalid entry for an operating point time value
Tip Strip: Invalid entry for a wildcard