ECUTS Storage Conditions
Ambient Temperature
0 °C to 60 °C (32 °F to 140 °F)
Relative Humidity
10% to 80%, non-condensing
Pollution Degree
2
Ensure the facility can accommodate the ECUTS shipping crate, which has the following dimensions and maximum weight.
Table 8. ECUTS Shipping Crate Dimensions and Weight
Specification
ECUTS-16000 Shipping Crate
ECUTS-16001 Shipping Crate
Width
800 mm (31.5 in.)
1390 mm (54.7 in.)
Depth
1060 mm (41.7 in.)
1259 mm (49.6 in.)
Height
1950 mm (76.8 in.)
2475 mm (97.4 in.)
Maximum Weight, Including ECUTS
3
340 kg (750 lbs)
425 kg (937 lbs)
Weight of Crate Without ECUTS
100 kg (220 lbs)
150 kg (331 lbs)
NI recommends a suitable lifting apparatus, such as a pallet jack, for transporting the ECUTS shipping crate around the facility.
If the facility cannot accommodate the ECUTS shipping crate, unpack the shipping crate and move the ECUTS using its mounted casters.
Inspecting the Shipment
Notice
Do not discard any parts or packaging until you complete the ECUTS bring-up and setup process. Do not reject the ECUTS
shipment.
1.
Before you open the crate, inspect the tilt sensors on the sides of the crate.
Note
A red sensor indicates that the sensor was activated during delivery.
Figure 38. ECUTS Shipping Crate Sensors
1. Tilt Sensor Sticker
2. Tilt Sensor
2.
Inspect the crate for any damage.
3.
Review the packing list attached to the crate.
4.
Accept the shipment.
Contact NI if the tilt sensor on the crate is activated or the crate is damaged.
Unpacking the ECUTS
Caution
To avoid injury, do not stand directly in front of the ECUTS when loading or unloading the ECUTS from the shipping
crate.
Attention
Ne pas se tenir directement devant le ECUTS lors de son chargement ou déchargement dans/depuis sa caisse
d'expédition.
Unpacking the ECUTS-16000
Note
The ECUTS-16000 shipping crate requires a clearance of at least 3.5 meters (11 ft) in front of the crate to lay out the crate
ramp and roll the ECUTS-16000 out of the crate.
3
Maximum weight of an ECUTS as configured by NI.
46
|
ni.com
|
ECUTS-16000/16001 User Manual