Index
PCI/PXI-1408 and NI-IMAQ for Win95/NT
I-2
©
National Instruments Corporation
monochrome and color used as
monochrome video line (figure), 5-5
NGate Start and NGate Stop, 5-10
parameter timing information (figure),
5-5 to 5-6
Reference Level, 5-8
Save As button, 5-5
StillColor button, 5-5
Sync Detect, 5-11
VSYNC, 5-11
ZERO Start and ZERO Stop, 5-10
chroma filter
Clean Chroma setting, StillColor dialog
box, 5-14
options for camera settings, 5-8
CLAMP Start and Stop settings for
camera, 5-10
Clean Chroma parameter, StillColor dialog
box, 5-14
color decoding, traditional, B-2 to B-4
color standards, B-1
color theory, B-7 to B-9
color planes, B-8 to B-9
hue, B-7
hue, saturation, luminance, and intensity
planes, B-9
image representations, B-8 to B-9
intensity, B-8
luminance, B-8
RGB image representation, B-8
saturation, B-7
white light and visible spectrum
(figure), B-7
CompactPCI specifications, 1-2
composite color video cameras
color acquisition, B-5
modulated signal, B-1
monochrome video signal, B-1
composite synchronization. See CSYNC.
configuration, 2-1 to 2-5. See also installation.
board configuration NVRAM, 3-5
external CLK and synchronization input
mode, 2-4
parts locator diagram
PCI-1408, 2-2
PXI-1408, 2-3
setting up IMAQ system, 1-7 to 1-8
Switch S1, 2-5
VIDEO0 input mode, 2-3 to 2-4
configuration utility. See IMAQconf
configuration utility.
Contrast parameter, StillColor dialog
box, 5-12
CSYNC
acquisition window control, 3-6
CSYNC mux, 3-3
external acquisition mode, 3-10
CSYNC external mode, Slave Acquisition
Mode, 5-21
CSYNC source, Operating Mode tab, 5-21
CSYNCIN± signal (table, 4-3
CSYNCOUT signal (table), 4-3
custom cable specifications, C-1
customer communication, xii, D-1 to D-2
D
delayed video acquisition, 3-6
Description tab, IMAQconf, 5-2 to 5-3
Diagnostics button, for testing
configuration, 5-23
DIFF input mode
external CLK and synchronization input
mode, 2-4
VIDEO0 input, 2-3 to 2-4
DMA controllers, 3-5